|
Metal Truck Flooring
We are engaged in manufacturing wide range of truck Flooring, which is available in fixed of length, width and other dimensions. Due to metal enforcement this densified ply does not bend. It has nigh load bearing capacity. During the manufacturing of Metal enforced ply sheets of metal wires are assembled in between the layers and it is bonded with PF resin in high pressure hydraulic press. Application: It can be used in truck, commercial vehicle flooring & other industrial uses, Automobile Sector Deck, Ceiling, Paneling Back rest Seat, Anti Skid Flooring etc. Thickness : 12,16,19 & 25 MM Size: 2440 to 3350 mm in length 600 to 1820 mm in width Density : 0.95 to 1.25 gm/cm3 Technical Details
| Dimensions |
Requirements |
Observation Values
|
| Length |
2440 + 6
|
2442mm |
| -6 |
| Width |
1220 + 3
|
1222mm |
| -0 |
| Thickness |
25mm |
24.90mm |
| Squareness |
2mm/1000mm |
0.95mm |
Edge Straightness
|
2mm/1000mm |
0.50mm |
Workmanship & finish
|
Clause |
Satisfactory |
Physical Porperties
|
|
|
| Density |
0.95 |
0.96 |
Moisture Content
|
5-15% |
7.90% |
Bond Quality Test
|
No visible delamination in glue line and plywood face
|
Satisfactory |
Boiling - Drying @ 60+2°C 4 Hrs. - 20 Hrs. Three Cycles
|
No forcible separation and fibre should be adhered between piles
|
Satisfactory |
Breaking Strength 250 x 50 x Thickness (mm)
|
Along / 550 Kgf
|
729Kgf |
Across - 400 Kgf
|
493 Kgf
|
Static Bending Strength Along the grain M.O.E.
|
Avg. - 7500N/mm2
|
8544.35 N/mm2
|
Ind - 6700N/mm2
|
7353.42 N/mm2
|
Across the grain M.O.E.
|
Avg - 4000N/mm2
|
5973.94 N/mm2
|
Ind - 3600N/mm2
|
4120.30 N/mm2
|
Along the grain M.O.R.
|
Avg. - 50
|
70.22 N/mm2
|
Ind/ - 45
|
48.29 N/mm2
|
Across the grain M.O.R.
|
Avg. - 30
|
58.78 N/mm2
|
Ind. - 27
|
42.30 N/mm2
|
Tensile Strength
|
Along - 55 Mpa
|
68.32 Mpa
|
Across - 50 Mpa
|
57.29 Mpa
|
|
